DETECTOR 5147298 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 339-9353 High Press. Cap Kit 1
265-2256 Wipers 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Use Tooling (A) to cap tube assemblies, fittings, ports, and openings on the fuel system in order to prevent contamination.
Turn the fuel supply to the OFF position.
Illustration 1 g03729229
Disconnect tube assembly (1), hose assembly (2), and hose assembly (3).
Remove bolts (4) and remove fuel transfer pump (5). Installation Procedure
Install fuel transfer pump (5) in the reverse order of removal.