DETENT AS 7S4607 - Caterpillar

Display Setup
Illustration 1 g06241154
Default Screens
To set up the display, connect the service harness to the display and power up. Once powered, you will see the following default screens shown in Illustrations 1.
Illustration 2 g06241156The screens are customizable and done by navigating through the different screen options to set as a custom default screens preferred by the user such as the following shown in Illustration 2.Software Flashing
When flashing the display, follow these steps:
Format a USB disk by right-clicking on the drive in your laptop and select 'Format'.
Illustration 3 g06249736
Set File System to FAT,
Save the file to the USB by clicking 'Start'.
Right Click on the USB with saved file and select 'Eject'.Service Passwords
No service passwords are required with the CMD5.Vessel Configuration
Illustration 4 g06241180
Main Screens
Illustration 5 g06241181
Port Configuration
Illustration 6 g06241182
Starboard Configuration
Illustration 7 g06241182
Day Mode
Illustration 8 g06241183
Night Mode
Engine Total
Illustration 9 g06241184
Port
Illustration 10 g06241185
Starboard
Splash Screens
Verify that the file name of you Splash Screen image does not contain any <space>.
EX) "CustomerScreen1.jpg"
Image Resolution: CMD5-800x480, CMD7–800x480, and CMD13-1280x800