DIE GP 1299184 - Caterpillar

Table 1
Required Tools
Description Qty
Measuring Tape 1
Stopwatch 1
Illustration 1 g00924805
Position the machine on level ground. Refer to Illustration 1.
Fully extend the boom cylinders.
Position the stick parallel to the ground.
Measure each cylinder's length from cylinder pin to cylinder pin.
Stop the engine.
Leave the machine in this position for five minutes. Measure each cylinder's length from cylinder pin to cylinder pin for drift.
Table 2
Cylinder Drift (Empty Bucket)
Item New Rebuild Service Limit
Boom Cylinder 6.0 mm (0.24 inch) or less 12.0 mm (0.47 inch) or less 24.0 mm (0.94 inch) or less
Stick Cylinder 10.0 mm (0.39 inch) or less 15.0 mm (0.59 inch) or less 25.0 mm (0.98 inch) or less