DIESEL ENGINE SUPPLEMENTARY 8S9693 - Caterpillar

8S9693 DIESEL ENGINE SUPPLEMENTARY Caterpillar parts 950

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8S9693
8S-9693
8S9693

Caterpillar 8S9693 DIESEL ENGINE SUPPLEMENTARY

Weight: 2 pounds 1 kg.

Buy DIESEL ENGINE SUPPLEMENTARY 8S9693 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

24 Dec 2017
311 Hundredths Pounds
CTP: CTP

Caterpillar GASKET KIT (8S9693)
8S9693 Weight(lbs): 3.10 Length(cm): 25.4000 Width(cm): 23.8000 Depth(cm): 7.0000

Show more prices Caterpillar parts

For full view, you need register

Compatible equipment models: 8S9693:

WHEEL LOADER 950 Caterpillar

Information:

Illustration 1 g00627962 (1) Tighten the gland nut to the following torque. ... 40 N m (30 lb ft)Note: When the fuel injection nozzle is installed, put a 2 mm (0.08 inch) bead of 4C-5591 Anti-Seize Compound on the first two threads of the gland nut. Do not rotate the fuel injection nozzle after installation. (2) Wire clip (3) Seat washer Remove the original seat washer from the threaded hole for the fuel injection nozzle which is located in the cylinder head. If the original seat washer is not removed, the projection of the nozzle will be incorrect when a new seat washer is installed. Do not reuse seat washer (3).Bench test the fuel injection nozzles at the following temperature. ... 18° to 20°C (64° to 70°F)
Do not use dirty test fluids when you test fuel injection nozzles. Also, do not test fuel injection nozzles unless you have the correct service tools.The use of dirty test fluids and the use of incorrect service tools will result in damage to fuel injection nozzles.
Table 1
Service Setting For The Fuel Injection Nozzle
Code(1) Set and Reset Pressure
"KB" 30400 kPa (4410 psi)
"KC" 29400 kPa (4263 psi)
"KD" 29400 kPa (4263 psi)
"KE" 29900 kPa (4337 psi)
"KF" 29900 kPa (4337 psi)
"KG" 30400 kPa (4410 psi)
"KH" 29400 kPa (4263 psi)
"KJ" 25300 kPa (3675 psi)
"KK" 30400 kPa (4410 psi)
"KL" 30400 kPa (4410 psi)
"KM" 30400 kPa (4410 psi)
"KN" 29400 kPa (4263 psi)
"KP" 30400 kPa (4410 psi)
"KR" 29400 kPa (4263 psi)
"KS" 29400 kPa (4263 psi)
"KT" 29400 kPa (4263 psi)
"KU" 29800 kPa (4322 psi)
"KV" 25300 kPa (3675 psi)
"KW" 29400 kPa (4263 psi)
"NX" 29400 kPa (4263 psi)
"NY" 29400 kPa (4263 psi)
"NZ" 29400 kPa (4263 psi)
"PA" 29400 kPa (4263 psi)
"PB" 29400 kPa (4263 psi)
"PC" 29400 kPa (4263 psi)
"PD" 27900 kPa (4043 psi)
"RZ" 25300 kPa (3675 psi)
"SA" 25300 kPa (3675 psi)
"SB" 25300 kPa (3675 psi)
"SC" 25300 kPa (3675 psi)
(1) The code letters are stamped on the side of the fuel injector body. The code letters are located below the connection for the nut of the high pressure fuel line.
Ensure that the new fuel injection nozzles have the same identification code as the previous fuel injection nozzles in the cylinder head. If the fuel injection nozzles have an incorrect identification code, damage to the engine may occur.
Leakage in 10 seconds ... 0 drops