1270776 DIFFERENTIAL & BEVEL GEAR GP Caterpillar parts
TH62
Rating:
Alternative (cross code) number:
CA1270776
127-0776
1270776
CA1270776
127-0776
1270776
TELEHANDLER,
Compatible equipment models: 1270776:
Information:
Located in the battery compartment.POISON/DANGER CAUSES SEVERE BURNS Contains sulfuric acid. Avoid contact with skin, eyes or clothing. Antidote: EXTERNAL - Flush with water. INTERNAL - Drink large quantities water or milk. Follow with milk of magnesia, beaten egg or vegetable oil. Call physician immediately. EYES: Flush with water for 15 minutes and get prompt medical attention. Batteries produce explosive gases. Keep sparks, flame, cigarettes away. Ventilate when charging or using an enclosed space. Always shield eyes when working near batteries.KEEP OUT OF REACH OF CHILDREN.General
Attach a "DO NOT OPERATE" or similar warning tag to start switch or controls of the towed and towing machine before servicing or repairing the machine. These tags, Form SEHS7332, are available from your Caterpillar dealer.Lubrication, maintenance or repair of the machine can be dangerous unless performed properly. Each person must satisfy himself that he has the necessary skill and information, proper tools and equipment, and that his work method is safe and correct. Caterpillar dealers are available to provide service and information.Perform all maintenance unless other otherwise specified as follows:The implements lowered to the ground.The engine stopped.The start switch key off and the key removed.If unit is attached to the towing machine, the towing machine should be properly parked and shut down.If unit is unhitched the stand must be secured and the drum blocked front and rear.Wear a hard hat, protective glasses and other protective equipment as required by job conditions.Do not wear loose clothing or jewelry that can catch on controls or other parts of the machine.Make certain all protective guards and covers are secured in place on the machine.Keep the machine, free of foreign material, such as debris, oil, tools and other items which are not part of the machine.Remove all loose items such as lunch boxes, tools and other items which are not part of the machine.Know the hand signals and who gives them. Accept signals from one person only.Never put maintenance fluids into glass containers.Report all needed repairs.Do not allow unauthorized personnel on the towing machine.When using pressure air for cleaning, wear a protective face shield and protective clothing.Maximum air pressure from the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.Crushing or Cutting Prevention
Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified.Stay clear of all rotating and moving parts.Keep objects away from moving fan blades. They will throw or cut any object or tool that falls or is pushed into them.Do not use a kinked or frayed wire rope cable. Wear gloves when handling the wire rope cable.Retainer pins, when stuck with force, can fly out and injure nearby persons.Wear protective glasses when striking a retainer pin to avoid injury to your eyes.Chips or other debris can fly off objects when struck. Make sure no one can be injured by flying debris before striking any object.Burn Prevention
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.At operating
Attach a "DO NOT OPERATE" or similar warning tag to start switch or controls of the towed and towing machine before servicing or repairing the machine. These tags, Form SEHS7332, are available from your Caterpillar dealer.Lubrication, maintenance or repair of the machine can be dangerous unless performed properly. Each person must satisfy himself that he has the necessary skill and information, proper tools and equipment, and that his work method is safe and correct. Caterpillar dealers are available to provide service and information.Perform all maintenance unless other otherwise specified as follows:The implements lowered to the ground.The engine stopped.The start switch key off and the key removed.If unit is attached to the towing machine, the towing machine should be properly parked and shut down.If unit is unhitched the stand must be secured and the drum blocked front and rear.Wear a hard hat, protective glasses and other protective equipment as required by job conditions.Do not wear loose clothing or jewelry that can catch on controls or other parts of the machine.Make certain all protective guards and covers are secured in place on the machine.Keep the machine, free of foreign material, such as debris, oil, tools and other items which are not part of the machine.Remove all loose items such as lunch boxes, tools and other items which are not part of the machine.Know the hand signals and who gives them. Accept signals from one person only.Never put maintenance fluids into glass containers.Report all needed repairs.Do not allow unauthorized personnel on the towing machine.When using pressure air for cleaning, wear a protective face shield and protective clothing.Maximum air pressure from the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.Crushing or Cutting Prevention
Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified.Stay clear of all rotating and moving parts.Keep objects away from moving fan blades. They will throw or cut any object or tool that falls or is pushed into them.Do not use a kinked or frayed wire rope cable. Wear gloves when handling the wire rope cable.Retainer pins, when stuck with force, can fly out and injure nearby persons.Wear protective glasses when striking a retainer pin to avoid injury to your eyes.Chips or other debris can fly off objects when struck. Make sure no one can be injured by flying debris before striking any object.Burn Prevention
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.At operating
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts differential Caterpillar catalog:
1616480
DIFFERENTIAL & BEVEL GEAR GP
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
8I4319
DIFFERENTIAL & BEVEL GEAR GP
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
8I4304
DIFFERENTIAL & BEVEL GEAR GP
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
1616482
DIFFERENTIAL & BEVEL GEAR GP
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
2379201
DIFFERENTIAL GP-LIMITED SLIP
914G, IT14G
914G, IT14G
1185025
DIFFERENTIAL GP-LIMITED SLIP
914G, IT14G
914G, IT14G
2379202
DIFFERENTIAL GP
914G, IT14G, IT14G2
914G, IT14G, IT14G2
1094717
DIFFERENTIAL GP
910G, 914G, IT14G
910G, 914G, IT14G
1175786
DIFFERENTIAL GP-NOSPIN
924F, 924G, 924GZ, IT24F
924F, 924G, 924GZ, IT24F
1357460
DIFFERENTIAL GP-LOCKUP
515, 525
515, 525
1119253
DIFFERENTIAL AR-REAR
938F, 938G, IT38F, IT38G
938F, 938G, IT38F, IT38G