DIFFERENTIAL & BEVEL GEAR GP 1598534 - Caterpillar

Illustration 1 g02500937
Table 1
Specification for 328-3516 Extender Lines Gp    
Item     Qty     Part     Specification Description    
1     2     8T-4137 Bolt     Apply Loctite 243 to the threads of the bolts.    
2     2     165-4732 Pin     The rear surface of the pin must be pushed tightly against the floor of the carriage in the frame assembly.    
3     2     7D-8508 Full Nut     Set the adjuster and the full nut to achieve the extender to main screed plate alignment. The outside surfaces of the plates should be at a distance of
0.0 to 6.0 mm (0.00 to 0.24 inch) from each other.    
4     2     165-4744 Adjuster    
5     2     283-6374 Hydraulic Cylinder Gp     The surface of the hydraulic cylinder group must be pushed tightly against the inner wall of carriage assembly.