DIFFERENTIAL & BEVEL GEAR GP 1834682 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 1S1668 TUBE-BYPASS
134 5P1471 HOSE (BULK) (134 CM)
2 5P4325 CLIP
1 8T4121 WASHER-HARD
1 8T4196 BOLT-HEX HEAD
2 1984766 WASHER-HARD
1 2397897 MUFFLER AS
2 3445675 NUT-HEX
2 4649213 BRACKET
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the Service Manual and attached Rework Procedure to replace the muffler and change the dust ejection hose from muffler to air cleaner.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-3000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to the Service Manual if/as necessary.
Remove existing muffler and dust ejection tube from air cleaner to muffler. The muffler mounting hardware and dust ejection hose clamps will be reused. Set new muffler in place. Install the 464-9213 Brackets on top of muffler mounts. Use existing hardware to bolt through brackets and muffler mounts. Install the 5P-4325 Clips. See Image1.1.1 and 1.1.2 for the location and orientation of the clips.
Image1.1.1
Image1.1.2