DIFFERENTIAL & BEVEL GEAR GP 1V5944 - Caterpillar

Illustration 1 g01441453
Make sure the steering frame lock is stored in the unlocked position, as shown. The steering frame lock must be removed in order to steer the machine.Note: Start the engine only from the operator's station. Never short across the starter terminals or across the batteries. Shorting could bypass the engine neutral start system. Shorting could also damage the electrical system.Before you mount the machine, perform a walk around inspection. Look for any damaged components and leaks. Report discrepancies and make any necessary repairs before operating the machineReferenceFor more information, refer to the Operation and Maintenance Manual, "Walk Around Inspection" for the machine that is being serviced.When you enter the operator's station, Inspect the condition of the seat belt and the condition of the mounting hardware. Replace any parts that are worn or damaged. Regardless of the appearance, replace the seat belt after three years of use. Do not use a seat belt extension on a retractable seat belt.Adjust the seat so that full pedal travel can be achieved when the operator's back is against the back of the seat.Make sure that the machine is equipped with a lighting system that is adequate for the job conditions. Make sure that all lights are working properly.Before you start the engine or before you move the machine, make sure that no one is on the machine, underneath the machine, or around the machine. Make sure that there are no personnel in the area.