DIFFERENTIAL & BEVEL GEAR GP 1V5945 - Caterpillar

No clearance for person in this area when lift arm lowers. Severe injury or death from crushing could occur.Install lift arm support pins before servicing machine in this area.Remove lift arm support pins and secure before resuming operation.
Before operating the machine, be sure the lift arm support pins are removed and placed in the stored position. Damage to the front frame and to the lift arm can result if the machine is operated with the lift arm support pins installed in the lift arm.
The lift arm support pins are located on both sides of the lift arm. Install the lift arm support pins before performing service work in the bucket control group area of the machine.
Park the machine on a flat, level surface in a straight ahead position.
Engage the parking brake.
Install the steering frame lock.Reference Refer to the Operation and Maintenance Manual, "Steering Frame Lock".
Illustration 1 g01282957
Raise the lift arm until lift arm support pin (1) can be aligned with the front frame tower.
Illustration 2 g01272525
Hold back pin lock (3). Turn lift arm support pin handle (2) counterclockwise (clockwise for the left side lift arm support pin), then push lift arm support pin (1) fully into the lift arm assembly, as shown. Release pin lock (3) to lock lift arm support pin (1) in position.
Repeat Step 5 for the left side lift arm support pin.
Lower the lift arm until lift arm support pins (1) contact the front frame tower.
Move the bucket to the DUMP position.Note: The following steps are for the removal of the lift arm support pins.
Raise the lift arm until the lift arm support pins (1) are above both sides of the front frame tower.
Hold back pin lock (3). Using lift arm support pin handle (2), pull lift arm support pin (1) out from the lift arm assembly. Turn lift arm support pin handle (2) clockwise (counterclockwise for the left side lift arm support pin). Release pin lock (3) to lock lift arm support pin (1) in position.
Repeat Step 10 for the left lift arm support pin.
Lower the bucket to the ground.
Remove the steering frame lock.Reference Refer to the Operation and Maintenance Manual, "Steering Frame Lock".