DIFFERENTIAL GP 2264394 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02022259
Attach a suitable lifting device onto engine oil cooler (1). The weight of engine oil cooler (1) is approximately 150 kg (330 lb).
Illustration 2 g02022251
Position engine oil cooler (1). Install bolts (13). Repeat for the opposite side.
Illustration 3 g02022250
Illustration 4 g02022246
Connect tube assembly (9). Install bolts (10). Connect tube assembly (11). Install bolts (12). Connect tube assembly (7). Install bolts (8). Connect tube assembly (5). Install bolts (6).
Illustration 5 g02022243
Clean the joint and the sealing lip on coupling (2). The tubes are a distance of 20 mm (1.0 inch) from each other. Center coupling (2) over the gap. Lubricate the bolts and tighten the bolts evenly between the bolts. Tighten the bolts to a torque of 20 1 N m (177 9 lb in). Never tighten the bolts in coupling (2) a second time.
Position clamps (4) and install bolt (3). Remove the suitable lifting device from engine oil cooler (1).
Fill the cooling system with coolant. Refer to Operation and maintenance Manual, "Cooling System Coolant - Change".