DIFFERENTIAL LOCK VALVE GROUP 2P7014 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     145-5242     Puller     1    Start By:
Connect the steering frame lock.
Illustration 1 g00451503
Remove horn button (1) from steering wheel (2). If necessary, use a screwdriver to pry off the horn button.
Illustration 2 g00451504
Disconnect harness assembly (5) from horn button (1) .Note: Mark the position of lever (6) for assembly purposes.
Remove nut (3), spacer (4), and lever (6) .
Illustration 3 g00842667
Remove bolts (8). Slide shroud (7) down the steering column.
Illustration 4 g00451506
Illustration 5 g00451507
Loosen retaining nut (9) .Note: Mark the position of the steering wheel for assembly purposes.
Use Tooling (A) to loosen steering wheel (2). Remove retaining nut (9) .
Illustration 6 g00451508
Lift steering wheel (2) .
Disconnect harness assembly (10) and harness assembly (11) .
Remove steering wheel (2) .Installation Procedure
Illustration 7 g00451508
Support steering wheel (2) .
Connect harness assembly (11) and harness assembly (10) .
Illustration 8 g00451506
Install steering wheel (2) in the original position.
Install retaining nut (9). The torque for retaining nut (9) is 50 4 N m (37 3 lb ft).
Illustration 9 g00842667
Slide shroud (7) to the original position. Install bolts (8) .
Illustration 10 g00451504
Install lever (6) in the original position. Install spacer (4) and nut (3) .
Connect harness assembly (5) to horn button (1) .
Illustration 11 g00451503
Install horn button (1) on steering wheel (2) .End By: Separate the steering frame lock.