DIFFERENTIAL & BEVEL GEAR GP 4646879 - Caterpillar

that the Safety Information, warnings, and instructions are read and understood before operation or maintenance procedures are performed.Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must also be performed.Note: Some maintenance items are for optional equipment. When Required
Battery - Recycle
Battery or Battery Cable - Disconnect
Fuel System - Prime
Daily
Cooling System Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Between the First 1000 to 2000 km (600 to 1200 miles) or 20 to 40 Service Hours
Belt - Inspect
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Idle RPM - Check/Adjust
Every 10 000 km (6250 miles) or 200 Service Hours or 6 Months
Air Compressor Filter - Clean/Replace
Battery Electrolyte Level - Check
Belt - Inspect
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Air Cleaner Element - Clean/Replace
Engine Oil Sample - Obtain
Hoses and Clamps - Inspect/Replace
PM Level 1 - Every 20 000 km (12 500 miles) or 400 Service Hours or 1 Year
Engine Oil and Filter - Change
Fuel Injection Nozzles - Test/Exchange
Fuel System Primary Filter - Clean/Replace
Every 500 Service Hours or 1 Year
Fuel Transfer Pump Strainer - Clean
PM Level 2 - Every100 000 km (62 500 miles) or 2000 Service Hours
Air Compressor - Inspect
Alternator - Inspect
Crankshaft Vibration Damper - Inspect
Engine Mounts - Inspect
Engine Valve Lash - Inspect/Adjust
Starting Motor - Inspect
Turbocharger - Inspect
PM Level 3 - Every 322 000 km (200 000 miles) or 2 Years
Cooling System Coolant (DEAC) - Change
Cooling System Water Temperature Regulator - Replace
Every 483 000 km (300 000 miles) or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 966 000 km (600 000 miles) or 6 Years
Cooling System Coolant (ELC) - Change
Overhaul
Overhaul Considerations