DIFFUSER 2732107 - Caterpillar

Illustration 1 g06296017
Table 1
Item Qty Part Specification Description
1 2 231-3667 Spring Length under test force is 662 mm (26 inch).
Test force is 130445 N (29325 lb).
Free length after test is 870.0 15.7 mm (34.2 0.7 inch).
2 4 3B-8489 Grease Fitting Apply grease, through fittings until the grease appears at the support assembly front seal.
3 4 278-4653 Pin Before assembly, use Loctite C5A Copper antiseize compound to the threads.
4 1 7P-7245 Valve Torque to 70 15 N m (52 11 lb ft)
5 2 236-7889 Hydraulic Track Adjustment Gp Before assembly, apply a thin coat of SAE 30 oil to outside diameter of piston.
6 1 7P-7736 Bushing Bore After assembly is 38.235 0.075 mm (1.5053 0.0029 inch).
Installation depth is 7.0 0.5 mm (0.27 0.02 inch)
7 2 4S-7762 O-Ring Seal Before assembly, use Loctite C5A Copper antiseize compound to the threads.
8 4 7X-0466 Bolt Before assembly, use Loctite C5A Copper antiseize compound to the threads.
Torque to 500 65 N m (369 48 lb ft).
9 2 7P-7733 Pin Before assembly, use Loctite C5A Copper antiseize compound to the threads.
Diameter is 38.062 0.040 mm (1.4985 0.0015 inch)
10 1 2J-6274 O-Ring Seal During assembly, lubricate the seal with the lubricant that is being sealed.
11 1 7P-7333 Seal As During assembly, lubricate the seal with the lubricant that is being sealed.
12 2 9G-9086 Bearing Bore After assembly is 101.90 0.03 mm (4.011 0.001 inch).