DISC 0328294 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9204     Lever Puller Hoist     1    Start By:
Remove the tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Remove".
Release the locking pressure in the load control valves of the lift cylinders. Refer to Disassembly and Assembly, "Load Control Valves (Lift Cylinder, Tilt Cylinder) - Remove".
Illustration 1 g01796274
Disconnect hose assemblies (8) from quick coupler (9). Disconnect clips (3) from control group (5) .
Remove plate (7) and pin (6) from lift cylinder (4) and control group (5) .
Lower lift cylinder (4) in order to allow lift cylinder (4) to rest on the frame.
Repeat Step 3 and 4 for the other side.
Remove plate (1) and pin (2) from control group (5).
Repeat Step 6 for the other side.
Remove the control group (5). The weight of control group (5) is approximately 385 kg (848 lb).