DISC 1199274 - Caterpillar

Illustration 1 g01794094
Top viewNote: Use a 5P-0960 Grease Cartridge to coat all the pin bores. (1) 234-3974 Pin As Quantity ... 2 Pin diameter ... 149.85 0.04 mm (5.900 0.002 inch) Bore diameter for the pin assembly ... 150.05 0.05 mm (5.908 0.002 inch) (2) 115-2670 Pin As Quantity ... 2 Pin diameter ... 149.85 0.04 mm (5.900 0.002 inch) Bore diameter for the pin assembly ... 150.05 0.05 mm (5.908 0.002 inch) (3) As required, use the following shims to adjust the maximum lateral clearance to 1.0 mm (0.04 inch): 174-8354 Shim Quantity ... 8 Thickness of one shim ... 0.5 mm (0.02 inch) 123-5362 Shim Quantity ... 4 Thickness of one shim ... 1.0 mm (0.04 inch) 123-5364 Shim Quantity ... 4 Thickness of one shim ... 2.0 mm (0.08 inch) (4) 4E-8726 Pin Pin diameter ... 89.85 0.04 mm (3.537 0.002 inch) Bore diameter for the pin ... 90.043 0.043 mm (3.5450 0.0017 inch) (5) Torque for two weld studs ... 30 7 N m (22 5 lb ft)