DISC 1G5408 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Lifting Bracket     2    
B     FT2712     Guide Stud     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01042414
Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately 65 kg (143 lb).
Remove two bolts (1). Install Tooling (B) .
Remove remaining bolts (1) that hold the flywheel to the crankshaft. Remove flywheel (2).
Illustration 2 g01042415
If necessary, use a hammer and a punch in order to remove ring gear (3) from flywheel (2) .