DISC KT- 2368081 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Stering Frame Lock - Separate and Connect" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature the implement hydraulic oil tank is hot and under pressure. Hot oil can cause burns.To prevent possible injury, release the pressure in the implement hydraulic system before hydraulic lines or components are disconnected or removed.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00748673
Typical Example
Open right side access door (1) .
Illustration 2 g00690235
Disconnect hose (4) from piston pump (2) .
Disconnect hose (5) from pressure and flow compensator valve (3) .
Illustration 3 g00690239
Disconnect hoses (6) and (7) from piston pump (2) .
Illustration 4 g00690241
Remove two bolts (8) and the washers from piston pump (2) .
Remove piston pump (2) from the machine.
Illustration 5 g00690242
Remove gasket (9) from piston pump (2) .