DISC-ABRASIVE 2368105 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Release the pressure in the hydraulic system.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02051453
Open door (1) .
Illustration 2 g02066117
Disconnect tee assembly (2) . Remove tube assembly (3) . Remove connector assembly (4) .
Illustration 3 g02066356
Remove bracket (5) .
Illustration 4 g02066374
Support the weight of brake accumulator (7) .
Remove bolts (6) .
Use two people in order to remove brake accumulator (7) . The weight of brake accumulator (7) is approximately 24 kg (53 lb).
Illustration 5 g02066423
Remove bracket (8) from brake accumulator (7) .
Illustration 6 g02066425
Remove adapter (9) from brake accumulator (7) . Remove O-ring seals (10) from adapter (9) .