DISC G. 2F5827 - Caterpillar

HF202
Illustration 1 g00922067
HF202 (1) Grapple arm. (2) Grapple arm cylinder. (3) Accumulator arm. (4) Accumulator arm cylinder.The main components of the holding system are the grapple arm, the grapple arm cylinder, the accumulator arm, and the accumulator arm cylinder.The grapple arm and the accumulator arm can be independently controlled. The grapple arm and the accumulator arm are used to hold a tree after the tree is cut. The design of the accumulator arm allows additional trees to be collected while the previous tree is still held. The accumulator arm is an assembly that is composed of three main pieces: two arm assemblies and one rubber band.
Illustration 2 g00922110
Holding system (2) Grapple arm cylinder. (4) Accumulator arm cylinder. (X3) Pump pressure (grapple arm CLOSE). (X4) Pump pressure (grapple arm OPEN). (X5) Pump pressure (accumulator arm OPEN). (X6) Pump pressure (accumulator arm CLOSE).Grapple cylinder (2) controls the movement of grapple arm (1). The grapple cylinder (2) closes grapple arm (2) onto the log during the felling of a tree.Accumulator arm cylinder (4) controls the movement of accumulator arm (3). The accumulator arm cylinder (4) closes onto the log. This holds the tree in the head when the head cuts multiple trees.The grapple arms and the accumulator arms are controlled by a valve on the machine. The maximum pressure that is required to open the arms on the machine is 25500 1000 kPa (3700 150 psi). The maximum pressure that is required to close the arms on the machine is 25500 1000 kPa (3700 150 psi). HF221 and HF222
Illustration 3 g00933027
HF221 (1) Grapple arms. (2) Grapple arm cylinders. (3) Accumulator arms. (4) Accumulator arm cylinders.
Illustration 4 g00933026
HF222 (1) Grapple arms. (2) Grapple arm cylinders. (3) Accumulator arms. (4) Accumulator arm cylinders.The main components of the holding system are the grapple arms, the grapple arm cylinders, the accumulator arms, and the accumulator arm cylinders.The grapple arms and the accumulator arms can be independently controlled. The grapple arms and the accumulator arms are used to hold a tree after the tree is cut. The design of the accumulator arms allows additional trees to be collected while the previous tree is still held. Each accumulator arm is an assembly that is composed of three main pieces: two arm assemblies and one rubber band.
Illustration 5 g00850558
Holding system (2) Grapple arm cylinders. (4) Accumulator arm cylinders. (5) Manifold. (6) Manifold. (X3) Pump pressure (grapple arm CLOSE). (X4) Pump pressure (grapple arm OPEN). (X5) Pump pressure (accumulator arm OPEN). (X6) Pump pressure (accumulator arm CLOSE).The grapple arms and the accumulator arms are controlled by a control valve on the machine. The maximum pressure that is required to open the arms on the machine is 25500 1000 kPa (3700 150 psi). The maximum pressure that is required to close the arms on the machine is 25500 1000 kPa (3700 150 psi).