DISC-FRICTION 3558990 - Caterpillar

Table 6
Necessary “H” Structure Plate Callouts and Dimensions for the D9 Tractor to be Fabricated
Qty Part Number Description
2 9P-6806 Plate “H” structure plate
2 7T-7330 Plate “H” structure plate
2 7T-7331 Plate “H” structure plate
Illustration 22 g01365089
Drawing containing the dimensions for 9P-6806 Plate to be fabricated.
(A) 40 mm (1.5748 inch)
(B) 220 mm (8.6614 inch)
(C) 70 mm (2.7559 inch)
Illustration 23 g03703561
Drawing containing dimensions for 7T-7330 Plate to be fabricated.
(D) 20 2 mm (0.79 0.08 inch)
(E) 160.0 1.3 mm (6.30 0.05 inch)
(F) 479.0 1.3 mm (18.86 0.05 inch)
(G) 40 mm (1.578 inch)
(H) 475.0 1.3 mm (18.70 0.05 inch)
(J) 27.0 1.5 mm (1.06 0.06 inch)
(K) 70.0 0.8 mm (2.76 0.03 inch)
(L) 10.0 1.5 mm (0.39 0.06 inch)
(M) 45°× 14.0 1.5 mm (0.55 0.06 inch) 2 places
(U) 238.5 1.3 mm (9.39 0.05 inch)
(V) Radius is 120 1.3 mm (4.72 0.05 inch)
Illustration 24 g01320338
Drawing containing the dimensions for 7T-7331 Plate to be fabricated.
(N) 9.0 1.5 mm (0.35 0.06 inch)
(O) 45°× 14.0 1.5 mm (0.55 0.06 inch) 2 places
(P) 10.0 1.5 mm (0.39 0.06 inch)
(Q) 70.0 0.8 mm (2.76 0.03 inch)
(R) 27.0 1.5 mm (1.06 0.06 inch)
(S) 40 mm (1.6 inch)
(T) 520.0 1.3 mm (20.47 0.05 inch)
Illustration 25 g01322293
(a) 9P-6806 Plate
(b) 7T-7330 Plate
(c) 7T-7331 Plate
Illustration 26 g01322409
Section (YY) with weld callouts and part identification.
Illustration 27 g01322416
Section (ZZ) with weld callouts.
Illustration 28 g01322419
Top view of saddle support.
Illustration 29 g01322421
Section (WW) view
Illustration 25 (d) Weld a minimum 12 mm (0.5 inch) fillet weld on both sides with penetration of 2.5 mm (0.1 inch) in two places.
Illustration 25 (e) Weld a minimum 12 mm (0.5 inch) fillet weld on both sides with penetration of 2.5 mm (0.1 inch) in four places.
Illustration 25 (f) Weld a minimum 18 mm (0.7 inch) bevel groove weld on both sides in two places.
Illustration 26 (g) Weld a minimum 10 mm (0.4 inch) fillet weld on one side with penetration of 2.5 mm (0.1 inch) in two places.
Illustrations 25 and 27 (h) Weld a minimum 10 mm (0.4 inch) J groove weld from (X) to (Y) on one side.
Illustrations 25 and 27 (j) Weld a minimum 10 mm (0.4 inch) J groove weld on one side from (V) to (W). The weld must not project above the surface. The