DISC-FRICTION 3T2466 - Caterpillar

ACTION REQUIRED
In the event of wiper seal detachment from one of the lift cylinders or the tilt cylinder, replace the existing hydraulic cylinder head.
Refer to UENR1483, Disassembly and Assembly, for specific instructions on lift or tilt cylinder removal, disassembly, assembly, and installation.
The new hydraulic cylinder heads are drilled and tapped to accommodate bolts and washers to retain the wiper seal. Refer to Images1 and 2 for the list of required parts for each hydraulic cylinder group.
Image1
Image2
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 10.0-hour job
Note: Labor allowance to rework one cylinder is 10.0 hours.
An additional 10.0 hours is allowed to rework two cylinders.
An additional 20.0 hours is allowed to rework three cylinders.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.