DISC 4E9882 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6v-4035 Sleeve 1
B 5F-7693 Spacer As 1
C 1P-0520 Driver Gp 1 Start By:
Remove the track brake. Refer to Disassembly and Assembly, "Track Brake - Remove".
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 1 g01333903
Use two people to position housing (1), Tooling (A) and Tooling (B) into a suitable press. The weight of housing (1) is approximately 28 kg (62 lb).
Remove retaining ring (2). Remove Tooling (A).
Illustration 2 g01333953
Remove plate (3).
Illustration 3 g01333965
Remove two disc springs (4). Use two people to remove Tooling (B) and housing (1) from the press. The weight of housing (1) is approximately 23 kg (50 lb).
Illustration 4 g01333975
Use Tooling (C) to remove piston (5).
Illustration 5 g01333983
Remove seals (6).