DISC-BRAKE 5373630 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g01134145
The control manifold was removed for illustration purposes.
Remove bolts (3), clip (2), bracket assembly (5), and guard (4). Position hose assembly (1) to the side.
Illustration 2 g01134150
Remove nut (7). Disconnect harness assembly (6) .
Remove bolts (8). Remove cover (9) and the gasket.
Illustration 3 g01134152
Illustration 4 g01134160
Remove bolts (10) and strips (11). Slide sleeves (12) into cover (13) .
Remove bolts (16) and elbow (15). Remove sleeves (12) .
Remove harness assembly (14) from the transmission.
Illustration 5 g01134180
Remove bolts (17) which mount manifold (18) to cover (13) .
Illustration 6 g01134190
Remove bolts (19) and (22) which mount transmission control valve (20) to the transmission.
Slide transmission control valve (20) toward the front of the machine in order to remove sleeves (21) and manifold (18) .
Remove transmission control valve (20) .