DISC 5448432 - Caterpillar

Setting the Plan View Rotation
Perform the following steps in order to configure the "Plan View Rotation" dialog.
From the "Setup Menu - Configuration" dialog, press the down arrow key or the up arrow key until "Plan View Rotation" is highlighted.
Press the "OK" key. The dialog in Illustration 1 appears.
Illustration 1 g01300293
Press the arrow keys until "Plan View - Rotation" is highlighted.
Press the soft key with a check mark and an "X" in order to enable "Rotation" or disable "Rotation".If "Rotation" is enabled, the plan view on the display rotates in order to keep the machine moving toward the top of the display. If "Rotation" is disabled, the plan view on the display is always drawn with north facing toward the top of the display.
Press the arrow keys until "Plan View - Autopan" is highlighted.
Press the soft key with a check mark and an "X" in order to enable "Autopan" or disable "Autopan".When "Autopan" is enabled, the plan view will pan automatically in order to keep the machine icon on the screen.
Do one of the following.
Press the "OK" key in order to accept the changes and return to the "Setup Menu - Configuration" dialog.
Press the "ESC" key in order to cancel any changes and return to the "Setup Menu - Configuration" dialog. You are asked to confirm that you do not want to save any changes.
Press the "ESC" key in order to exit the "Setup Menu - Configuration" dialog. The changes take effect immediately.