DISC A 6T7467 - Caterpillar

ACTION REQUIRED
****Parts Stock ****
Remove all 1R-1433 Seals from dealer parts stock.
Rework all 200-0885 and 358-1398 Link Assemblies currently in dealer parts stock or dealer exchange inventory. Rework the link assemblies by replacing the four 1R-1433 Seals with 5017953/">501-7953 Seals.
****Affected Product****
At the daily walk around inspect all seals to check for leaks. If they are leaking fill the joint with grease. Refer to OMM.
Replacement of the Seal is recommended to be done at a tire change interval or other planned maintenance interval to minimize downtime.
NOTE ? If seal is leaking at a time that is not convenient to service the machine, fill the joint with grease. Properly fix the seal when the machine is serviced at the next scheduled maintenance interval.
Replace parts as described in the Disassembly and Assembly manual RENR2588.
NOTE ? When installing the Seal, please ensure Seal is installed with the part number out. See attached picture for clarification. After the seal is replaced, refill the joint with proper gear oil. Do not continue to operate the machine for an extended time if the seal is out of the position. Without proper lubrication, the bearing will fail.
Failures must be identified by location: lower left link seal, lower right link seal, upper right link seal, upper left link seal. This service letter allows only one claim per location per truck.
Record truck and component hours and seal date codes. Refer to Parts Disposition.
Image1
Image2
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all individual 1R-1433 Seals removed from dealer parts stock.
Four 5017953/">501-7953 Seals and 4 hours of labor will be allowed for each link assembly reworked from dealer parts stock or dealer exchange inventory.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-18000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 25.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
This is a 25-hour job to R&I one link and replace all four of the link seals.
If there is a failure on the bottom and upper link at the same time, and they are located on the same side, only 22 hours of labor will be allowed on the claim for the second link since the R&I of the tire will only need to be done once.
Failures must be identified by location: lower left link seal, lower right link seal, upper right link seal, upper left link seal. This service letter allows only one claim per location per truck. Enter the failure location in the additional comments section of the claim.
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.