DISC-THRUST 7T3141 - Caterpillar

Off-Highway Truck/Tractor AllIntroduction
Table 1
Revision Summary of Changes in SEBF8083
20 Updated dimensions and added 497-3506 to Table18
19 Corrected dimension in Table 18.
18 Added confidentiality statement and improved illustrations.
17 Updated and corrected dimensions to Table 18. © 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law. Information contained in this document is considered Caterpillar: Confidential Yellow.This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.For questions or additional information concerning this guideline, submit a form for feedback in the Service Information System. To address an urgent issue, use the following resources to communicate your request to Caterpillar Repair Process Engineering:
Caterpillar Dealer Technical Communicator
Dealer Solution Network
Caterpillar Technical Representative
Knowledge NetworkCanceled Part Numbers and Replaced Part Numbers
This document may include canceled part numbers and replaced part numbers. Use NPR on SIS for information about canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.Summary
This guideline provides the procedures that are necessary to determine the reusability for rear spindles on Off-Highway Trucks. This guideline includes information about the salvage of wheel bearing journals of spindles on Off-Highway Trucks. This guideline explains the procedure to salvage rear spindles on Off-Highway Trucks. Specifications are provided for rear spindles.This guideline contains the latest standards of engineering, which will help minimize owning and operating costs. A part can be expected to reach the next Planned Component Repair if the part meets the specifications in this guideline and if the part is used in the same application. Use this guideline to determine whether a part should be reused. Do not install a part that is not reusable. During reconditioning, correct any condition that might have caused the original failure.Important Safety Information
Illustration 1 g02139237Follow all safety warnings. Most accidents that involve product operation, maintenance, or repair are caused by failure to observe safety warnings. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. Personnel must be properly trained in order to perform maintenance, repair, or operate any machine. Safety precautions and warnings are provided this instruction and on Caterpillar products. These warnings should be observed before performing any procedures. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are not all inclusive.The hazards are identified by the “Safety Alert Symbol” which is followed by a “Signal Word” such as “DANGER”, “” or “CAUTION”.