DISC-FRICTION 9W7020 - Caterpillar

Illustration 1 g01439280
Right side view
The dimensions for installing the camshaft bearings are from the rear face of the cylinder block.For engines that have 8 cylinders, use dimensions (L), (K), (J), (H), and (G).For engines that have 12 cylinders, use dimensions (L), (K), (J), (H), (G), (F), and (E).For engines that have 16 cylinders, use dimensions (L), (K), (J), (H), (G), (F), (E), (D) and (C).For engines that have 20 cylinders, use all of the dimensions.Note: The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle.Dimensions (A) ... 2740.0 1.5 mm (107.87 0.06 inch) (B) ... 2470.0 1.5 mm (97.24 0.06 inch) (C) ... 2200.0 1.5 mm (86.61 0.06 inch) (D) ... 1930.0 1.5 mm (75.98 0.06 inch) (E) ... 1660.0 1.5 mm (65.35 0.06 inch) (F) ... 1390.0 1.5 mm (54.72 0.06 inch) (G) ... 1120.0 1.5 mm (44.09 0.06 inch) (H) ... 850.0 1.5 mm (33.46 0.06 inch) (J) ... 580.0 1.5 mm (22.83 0.06 inch) (K) ... 310.0 1.5 mm (12.20 0.06 inch) (L) ... 40.0 1.5 mm (1.57 0.06 inch)