DISPLAY GP-MONITOR 4485536 - Caterpillar

Installation procedure
Table 1
Required Tools    
Tool     Part Number     Description     Quantity    
A     138-7574     Link Bracket     4    
Illustration 1 g01018955
Attach a suitable lifting device with Tooling (A) to cab (21) . Install cab (21) . The weight of cab (21) is approximately 1225 kg (2700 lb).
Illustration 2 g01018963
Install three outer cab mounting bolts (19) . Tighten bolts (19) to a nitrate of 1600 200 N m (1180 148 lb ft).
Illustration 3 g01019017
One of the cab mounting bolts (20) is accessed from the inside of the cab. Install bolt (20) that is located on the right rear of the inside of the cab. Torque bolt (20) to 1600 200 N m (1180 148 lb ft).
Illustration 4 g01018953
Connect harness assemblies (17) and (18) on the right side of the cab.
Illustration 5 g01018947
Install plate (16) and install bolts (15) . Install belt (14) . Install bolts (13) .
Illustration 6 g01018927
View of the front underside of the cab through access hole that is located under the cab
Connect harness assemblies (11) and (12) to the two electrical boxes that are located under the front of the cab.
Illustration 7 g01018910
View from the left underside of the cab
Connect harness assembly (10) .
Illustration 8 g01018908
Connect hoses (7) and (8) for the heater. Connect hose assemblies (5) and (6) for the air conditioning. Connect ground strap (9) .
Illustration 9 g01018892
Install access panel (4) . Use two people in order to install the access panel. Install bolts (3) .
Illustration 10 g01018894
Illustration 11 g01018943
Openshutoff valves (1) and (2) .