DISPLAY 4731093 - Caterpillar

Bucket Positioner
1. Lower bucket to ground. 2. Position bucket at desired angle to ground, then stop engine. Move tilt control to TILT BACK. 3. Loosen bolts and move cam against roller until tilt control returns to HOLD. Tighten bolts. 4. To test adjustment, start engine, raise and dump bucket. Move tilt control lever to TILT BACK. 5. When pre-set bucket angle is reached, tilt control lever will return to HOLD.Bucket Lift Kick-out
1. Raise bucket to desired height and stop engine. 2. Loosen bolt and position high point of cam against valve lever. 3. Tighten bolt, then lower bucket to ground. 4. Start engine and lock bucket lift control in RAISE. 5. At pre-set lift height, control will return to HOLD.