AVSPARE.COM
parts catalog

DISTRIBUTION AR 3904475 - Caterpillar



3904475 DISTRIBUTION AR Caterpillar parts D5K2 XL DISTRIBUTION
Rating:
25
Alternative (cross code) number:
CA3904475
390-4475
3904475
Caterpillar 3904475 DISTRIBUTION AR

Buy DISTRIBUTION AR 3904475 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3904475:

TRACK-TYPE TRACTOR  D5K2 XL   Caterpillar
  For full view, you need register

Information:


PARTS NEEDED
Qty
Part Number Description
8 8T0656 BOLT
8 8T3282 WASHER-HARD
1 4993711 HOUSING AS-DIFF
1 5044889 HOUSING AS-DIFF
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Replace the two existing housings with new improved housings and rework the carrier assembly. The carrier assembly must have a milled slot centered between the two bearing cap holes per the attached Rework Procedure in order to provide adequate clearance for the new housings.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-8000 hrs,
0-24 mo 100.0% 0.0% 0.0% 0.0% 0.0% 100.0%
8001-25000 hrs,
25-60 mo 33.0% 0.0% 0.0% 0.0% 50.0% 100.0%
This is a 2.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
This is a 2.0-hour job to mill the slot in the differential carrier.
No D&A labor is allowed since this program is to be implemented at PCR. This applies to housings that are cracked or not reusable from fretting based on the reusability guidelines shown in SEBF8227.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Mill a 65 mm slot centered between the two bearing cap holes into the 104-9408 or 273-2167 differential carrier, part of 104-9407 or 266-2093 carrier assemblies which are part of 104-9406 or 266-2092 carrier assemblies. The slot should be 7.6 mm from the bearing surface.
Image1.1.1
Image1.1.2
Image1.1.3

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.