DISTRIBUTION AR 3924209 - Caterpillar

Illustration 2 g03849662
(11) Solenoid Valve (Hydraulic Fan) Cold Start Bypass Valve (If Equipped)Braking and Hydraulic Fan System
The brake and the hydraulic fan system consist of the following components:Monitoring System
Illustration 3 g01330750
The monitoring system (7) is located in the operator console.Piston Pump (Brake and Hydraulic Fan)
Illustration 4 g01374787
View of the engine compartment without the engine.Piston pump (3) is connected to an output shaft of the transmission.Pump Control Valve
The pump control valve (4) is located on the bottom of the piston pump (3) .Control Manifold
Illustration 5 g01374796
The manifold is located on the right side of the machine in the engine compartment.The control manifold (2) is located on the right side of the machine. The control manifold (2) is just above the frame rail.Brake Accumulator
Illustration 6 g01296310
The brake accumulators (5) are mounted on the back of the cab.Service Brake Control
Illustration 7 g01102713
The service brake control (6) is located in the cab.Service Brakes
Illustration 8 g01330769
There is a service brake (9) in each of the four-wheel groups.Parking Brake
Refer to the Power Train Systems Operation/Testing and Adjusting for information regarding the parking brake and parking brake components for your machine.Gear Motor (Hydraulic Fan)
Illustration 9 g01330777
The gear motor (hydraulic fan) (1) is part of the cooling group and the gear motor (hydraulic fan) (1) is located in the rear of the machine.Oil Cooler (Brake and Hydraulic Fan)
Illustration 10 g01330781
The oil cooler (brake and hydraulic fan) (8) is located at the rear of the machine in front of the radiator.AWD Oil Cooler (Brake and Hydraulic Fan)
Illustration 11 g01520501
The oil cooler (brake and hydraulic fan) (8) is located at the rear of the machine near the radiator in front of the radiator.Solenoid Valve (Hydraulic Fan) Cold Start Bypass Valve (If Equipped)
Illustration 12 g03849698
Left rear wheel and panels removed for clarity.The cold start bypass valve is located on the left rear of the machine.