AVSPARE.COM
parts catalog

DISTRIBUTION AR 3966746 - Caterpillar



3966746 DISTRIBUTION AR Caterpillar parts 312D DISTRIBUTION
Rating:
62
Alternative (cross code) number:
CA3966746
396-6746
3966746
Caterpillar 3966746 DISTRIBUTION AR

Buy DISTRIBUTION AR 3966746 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3966746:

EXCAVATOR  312D   Caterpillar
  For full view, you need register

Information:

In order to obtain an accurate weight, make sure that the pins are lubricated on the lift arm linkage. The hydraulic oil is warmed up to the normal operating temperature. In order to weigh a bucket of material, lift a loaded bucket. The bucket should be racked back fully. Move the lift lever smoothly into the full detent position. The loaded bucket will be weighed as the bucket travels through the upper lifting range. As the bucket is being weighed, the top line of the display will show "WEIGH". The bottom line will show dashes.When weighing is completed, the top line will show the weight of the bucket. If the operator lifts a significantly larger load that exceeds the calibration weight by 50%, the message "MAX" will appear on the display. If this message appears, dump some material from the bucket and lift again. If the "MAX" message appears repeatedly, recalibration is required.See Operation and Maintenance Manual, "System Calibration" for information on recalibration. The weight will be displayed in the selected units. The possible units are shown below.
US Tons
Metric Tons
Lb X 1000The bottom line of the display will show the accumulated weight of the truck. This weight is from the last time "STORE" or "CLEAR" was pressed.The rpm of the engine should be kept constant through the lifting range. Avoid directional shifting or harsh turning in order to ensure accurate weighing.Note: If the lift system has been idle for more than 4 hours, the error message "LIFT BUCKET 10 TIMES" will appear on the display when the operator lifts the bucket.See Operation and Maintenance Manual, "Normal Weighing Mode" for information on the error message.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.