AVSPARE.COM
parts catalog

DISTRIBUTION AR 3966793 - Caterpillar



3966793 DISTRIBUTION AR Caterpillar parts 314D CR DISTRIBUTION
Rating:
44
Alternative (cross code) number:
CA3966793
396-6793
3966793
Caterpillar 3966793 DISTRIBUTION AR

Buy DISTRIBUTION AR 3966793 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3966793:

EXCAVATOR  314D CR   Caterpillar
  For full view, you need register

Information:


Illustration 1 g01138233
Ensure that the following conditions are met:
The rotation sensor is positioned on the mounting plate.
The blade is perpendicular to the machine.
From the "Configuration" menu, press the arrow keys until "Diagnostics" is highlighted on the LCD.
Press the "OK" key.The "Diagnostics" menu will appear.
From the "Diagnostics" menu, press the arrow keys until "Sensor Data" is highlighted on the LCD.
Press the "OK" key.The "Sensor Data" menu will appear.
Press the arrow keys in order to select the rotation sensor.
Proceed with a full sensor calibration if the following conditions are met:
The rotation angle is within 32 degrees of zero degrees.
The sensor is within a specification.Refer to Systems Operation, Troubleshooting, Testing and Adjusting, KENR6333, "Full Sensor - Calibrate" for additional information.
If the rotation angle is greater than 32 degrees remove the rotation sensor from the mounting plate.Note: Do not disconnect the machine harness from the sensor.
Illustration 2 g01277935
Loosen the allen head screw for the 250-2172 Bracket Kit .Refer to Illustration 2.
Illustration 3 g01277936
Place a piece of folded paper or a spacer under the drive arm.Refer to Illustration 3.
Position the drive arm for the sensor, so that it covers the seal screw. Use a small flat head screwdriver in order to rotate the shaft until the display reads zero.
Tighten the allen head screw on the drive arm for the sensor. Recheck the reading.
Repeat Step 9 through Step 13 until the sensor is adjusted to 32 degrees.
Reattach the rotation sensor to the swivel lid.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.