0860769 DOOR ASSY. Caterpillar parts
E110B, E120B, E140, E200B, E70B
Rating:
Alternative (cross code) number:
CA0860769
086-0769
0860769
CA0860769
086-0769
0860769
Weight: 93 pounds 42 kg.
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Caterpillar parts catalog:
Information:
Table 3 lists warning messages that relate to general AccuGrade system operation.
Table 3
General Warning Messages
Message Reason Solution
"Avoid Zone Entered" Machine has entered an "Avoidance Zone". This is an area that has been designated dangerous for machine operation Use "Plan View" to guide the machine out of the Avoidance Zone.
"Loading Data" The display is loading the current design information. The display is loading the "Layered Lift" surface. Wait for the message to stop. It will disappear after a short period.
"Check Machine Type" The stored machine settings are invalid. Restore the correct machine settings file or ask the site manager to correct the system configuration.
Table 4
General Warning Messages
Message Problem Solution
Bench Required A 2D vertical guidance method is selected. The system requires a reference elevation. Refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section.
Rotate Machine The machine's orientation has not been initialized. Refer to Operation Maintenance Manual, SEBU8501, "Machine Checks" section. The information follows the subtitle "Check The 3D Bucket Guidance".
Select Profile The profile vertical guidance method has been selected, and the system requires that a profile design be selected. Select a profile.
1) From any guidance screen, press "Profile". The "Select Profile" dialog appears.
2) Select the desired profile. The guidance screen appears again. The warning message, "Bench Required", is displayed. Also, "Bench Required" will be flashing.
For information on benching, refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section. Table 5 lists the messages that relate to the AccuGrade system that is installed on excavators.
Table 5
Excavator Status Messages
Message Indicates that... Solution
"Check Boom Sensor" The boom position sensor is not connected, out of range, or not zeroed. Check the boom position sensor and cable harness
Table 3
General Warning Messages
Message Reason Solution
"Avoid Zone Entered" Machine has entered an "Avoidance Zone". This is an area that has been designated dangerous for machine operation Use "Plan View" to guide the machine out of the Avoidance Zone.
"Loading Data" The display is loading the current design information. The display is loading the "Layered Lift" surface. Wait for the message to stop. It will disappear after a short period.
"Check Machine Type" The stored machine settings are invalid. Restore the correct machine settings file or ask the site manager to correct the system configuration.
Table 4
General Warning Messages
Message Problem Solution
Bench Required A 2D vertical guidance method is selected. The system requires a reference elevation. Refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section.
Rotate Machine The machine's orientation has not been initialized. Refer to Operation Maintenance Manual, SEBU8501, "Machine Checks" section. The information follows the subtitle "Check The 3D Bucket Guidance".
Select Profile The profile vertical guidance method has been selected, and the system requires that a profile design be selected. Select a profile.
1) From any guidance screen, press "Profile". The "Select Profile" dialog appears.
2) Select the desired profile. The guidance screen appears again. The warning message, "Bench Required", is displayed. Also, "Bench Required" will be flashing.
For information on benching, refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section. Table 5 lists the messages that relate to the AccuGrade system that is installed on excavators.
Table 5
Excavator Status Messages
Message Indicates that... Solution
"Check Boom Sensor" The boom position sensor is not connected, out of range, or not zeroed. Check the boom position sensor and cable harness
Parts door Caterpillar catalog:
0855407
DOOR ASSY.
E110B, E120B, E200B, E70B, EL240B
E110B, E120B, E200B, E70B, EL240B
0993619
DOOR ASSY.
E110B, E120B, E200B
E110B, E120B, E200B
0861078
DOOR CATCH LEVER ASSY.
E120B, E200B
E120B, E200B
5I6120
DOOR CATCH ASSY.
E120B, E200B
E120B, E200B
0862374
DOOR ASSY.
E300B, EL240B
E300B, EL240B
0856435
DOOR SASH ASSY.
E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
7Y8678
DOOR AS
375
375
7Y8588
DOOR AS
375
375
2103685
DOOR AS
330C L
330C L
2109165
DOOR AS
M325B
M325B
0873375
DOOR AS
350 L
350 L
0967901
DOOR ASSY.
E200B
E200B