DOOR AS-RH 1318053 - Caterpillar

Assembly Procedure
Illustration 1 g01211576
Install spring (10).
Illustration 2 g01211575
Illustration 3 g01211572
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seals (9) onto plugs (4) and (5).
Install spool (7) and spring (8).
Install spool (6).
Install plugs (4) and (5).
Illustration 4 g01211571
Install O-ring seals (3).
Illustration 5 g01211570
Lubricate the O-ring seals on valve assembly (2) with lubricant that is being sealed. Install valve assembly (2) and bolts (1). Tighten bolts (1) to a torque of 4 1 N m (35 9 lb in).
Repeat Step 6 and Step 7 for the remaining valve assemblies. End By:
Install the control manifold (pilot oil).