2057759 DOOR AS Caterpillar parts
D8R, D8R II
Rating:
Alternative (cross code) number:
CA2057759
205-7759
2057759
CA2057759
205-7759
2057759
Weight: 40 pounds 18 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Illustration 1 g00923101
Raise radiator access door (1) .
Remove nut (2) from fan hub (3) .
Illustration 2 g01197606
Loosen bolts (4) from the back of fan hub (3) .
Use Tooling (A) in order to remove fan (5) .
Illustration 3 g00921936
Illustration 4 g00921937
Disconnect hose assemblies (6) and harness assembly (7) .
Illustration 5 g00921938
Remove bolts (8) .
Remove bracket (9) and motor (10) as a unit.
Illustration 6 g01195844
Remove bolts (11) .
Remove motor (10) from bracket (9) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Illustration 1 g00923101
Raise radiator access door (1) .
Remove nut (2) from fan hub (3) .
Illustration 2 g01197606
Loosen bolts (4) from the back of fan hub (3) .
Use Tooling (A) in order to remove fan (5) .
Illustration 3 g00921936
Illustration 4 g00921937
Disconnect hose assemblies (6) and harness assembly (7) .
Illustration 5 g00921938
Remove bolts (8) .
Remove bracket (9) and motor (10) as a unit.
Illustration 6 g01195844
Remove bolts (11) .
Remove motor (10) from bracket (9) .
Caterpillar parts catalog:
Parts door Caterpillar catalog:
2057758
DOOR AS
D8R, D8R II
D8R, D8R II
1267585
DOOR AS
D8R, D8R II
D8R, D8R II
1267584
DOOR AS
D8R, D8R II
D8R, D8R II
1642962
DOOR AS
D8R
D8R
1694268
DOOR AS
D10R, D11R, D9R
D10R, D11R, D9R
1309235
DOOR AS
D10R, D11R, D9R
D10R, D11R, D9R
1879162
DOOR AS
D7R, D7R II
D7R, D7R II
1879161
DOOR AS
D7R, D7R II
D7R, D7R II
1140389
DOOR AS
D7R
D7R
1Z9232
DOOR AS
D7R, D7R II
D7R, D7R II
1Z9275
DOOR AS
D7R, D7R II
D7R, D7R II
1102729
DOOR AS
D11N, D11R
D11N, D11R