DOOR GP-ACCESS 2308741 - Caterpillar

Removal Procedure
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood and Exhaust Ejector - Remove and Install" for the proper procedure.
Remove the refrigerant condenser. Refer to Disassembly and Assembly, "Refrigerant Condenser - Remove and Install" for the proper procedure.
Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove" for the proper procedure.
Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install" for the proper procedure.
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" for the proper procedure.
Remove the oil filter and the base. Refer to Disassembly and Assembly, "Engine Oil Filter and Base - Remove and Install" for the proper procedure.
Illustration 1 g00793460
Disconnect electrical connector (1) and electrical connector (2) from the sensors in the aftercooler base.
Remove the clips (not shown) that hold the sensor wire to the valve cover base.
Illustration 2 g00793463
Remove bolts (3). Remove bottom aftercooler housing (4) .
Illustration 3 g00793465
Remove tube assembly (5) .
Illustration 4 g00793467
Loosen clamp (6) and remove vent (7). Disconnect fuel line (8). Remove bolts (9). Put the mounting bracket and fuel filter assembly (10) out of the way.
Illustration 5 g00793468
Remove mounting bolt (11) for the dipstick, mounting bracket (12) for the high speed oil change arrangement, and bracket (13) for the coolant line by removing the necessary bolts.
Continue the removal of the cylinder head by referring to Disassembly and Assembly, RENR1223, "3176C/3196 Engine", "Cylinder Head - Remove".