DOOR AS-CAB 2471853 - Caterpillar

Illustration 16 g03550490
(C) 4 Valve, 1 Handle
Illustration 17 g03430146
Japan 3 Valve, 2 handle
(27) Joystick Control (28) Speed 1 and Speed 2 (29) Differential Lock (30) Forward/Reverse Control (31) Proportional 3 - Auxiliary Hydraulics (32) Continuous Flow (33) Proportional 4 - Auxiliary HydraulicsFLOAT - There are 2 activation methods for float.
Operator holds float position.
Locked float activation position.
Operator Holds FloatPush the lever fully forward as far as it will travel to engage the detent position, this will activate float control. When the lever is moved into the detent, the operator will feel a slight change in the required effort to push the joystick into the detent. Releasing the joystick back to the hold position will stop the float control.Note: This can only be held for 60 seconds as it will automatically release after that time.
Locked Float ActivationPush the lever fully forward through to the detent position and immediately release the joystick to allow it to return to the HOLD position. This will activate float and will maintain until a command to cancel it is made. To cancel this locked float position, move the joystick control to the lift position and when you see any movement of the loader the float will have been canceled.Note: In both cases when activating/deactivating float function the indicator light on the front display will flash 3 times.In both cases when float is active then the LED light indicator on the front display will be lit.LOWER - Push the joystick forward.HOLD - The joystick will return to this position when the joystick is released.RAISE DETENT (If Equipped) - Pull the lever rearward into the detent to activate the Raise Kickout. When the lever is moved into the raise detent, the operator will feel an increased resistance from the lever. Once in the detent, release the lever to the HOLD position to activate the Raise Kickout. The attachment will continue until the attachment reaches the raise kickout height. To override the kickout manually, the lever must be moved at least 6 degrees from the HOLD position. The kickout will not be activated if the lever is held in the detent