2915006 DOOR GP-ACCESS Caterpillar parts
924H, 924HZ, 928HZ
Rating:
Alternative (cross code) number:
CA2915006
291-5006
2915006
CA2915006
291-5006
2915006
Weight: 22 pounds 9 kg.
WHEEL LOADER,
Number on catalog scheme:
1
For full view, you need register
Information:
Probable Causes
Leaking injector sleeve and/or damaged sealRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Leaking injector sleeve and/or damaged seal
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head.
Refer to the Disassembly and Assembly manual for details.
Do not allow the pressure on the cooling system to exceed 103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector sleeve
Result: The injector sleeve is leaking.
Repair: Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Do not crank the engine if a cylinder is full of fluid. Catastrophic damage can occur to the engine.
Evacuate all cylinders of fluid before trying to start the engine.
Leaking injector sleeve and/or damaged sealRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Leaking injector sleeve and/or damaged seal
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head.
Refer to the Disassembly and Assembly manual for details.
Do not allow the pressure on the cooling system to exceed 103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector sleeve
Result: The injector sleeve is leaking.
Repair: Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Do not crank the engine if a cylinder is full of fluid. Catastrophic damage can occur to the engine.
Evacuate all cylinders of fluid before trying to start the engine.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts door Caterpillar catalog:
914G, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, 938H, IT14G, IT28G, IT38H
2908495
DOOR GP-CAB
924G, 924H, 924HZ, 928H, 928HZ
924G, 924H, 924HZ, 928H, 928HZ
2908492
DOOR GP-CAB
914G, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT14G, IT28G
914G, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT14G, IT28G
2908490
DOOR GP-CAB
924G, 924H, 928HZ
924G, 924H, 928HZ
2898960
DOOR GP-ACCESS
924H, 924HZ, 928H, 928HZ
924H, 924HZ, 928H, 928HZ
2908489
DOOR GP-CAB
924G, 924H, 928HZ
924G, 924H, 928HZ
2908491
DOOR GP-CAB
924G, 924H, 924HZ, 928HZ
924G, 924H, 924HZ, 928HZ
2898961
DOOR GP-ACCESS
924H, 924HZ, 928HZ
924H, 924HZ, 928HZ
2915010
DOOR GP-ACCESS
924H, 924HZ, 928HZ
924H, 924HZ, 928HZ
1988945
DOOR AS-HOOD
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
1988946
DOOR AS-HOOD
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
2898900
DOOR AS-ACCESS
924H, 924HZ, 928HZ
924H, 924HZ, 928HZ
4245705
DOOR GP-ACCESS
525D, 535D, 545D, 555D
525D, 535D, 545D, 555D
2680643
DOOR GP-ACCESS
315D L, 319D L, 319D LN
315D L, 319D L, 319D LN
3288705
DOOR GP-CAB
914G, 924GZ, 930G, IT14G, IT28G
914G, 924GZ, 930G, IT14G, IT28G
3018252
DOOR GP-ACCESS
906H, 906H2, 907H, 907H2, 908H, 908H2
906H, 906H2, 907H, 907H2, 908H, 908H2
1423864
DOOR GP-ACCESS
320C, 320C L
320C, 320C L
3219400
DOOR GP-ACCESS
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
3849082
DOOR GP-ACCESS
318D L, 318D2 L
318D L, 318D2 L
6C4168
DOOR GP-CAB
950F, 966F, 980F, 980F II
950F, 966F, 980F, 980F II
4I6973
DOOR GP-CAB
311, 311B, 312, 312B, 315, 315B, 320, 320 L, 320B, 320B L, 320N, 322, 322B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 L, 330B, 330B L, 345B L
311, 311B, 312, 312B, 315, 315B, 320, 320 L, 320B, 320B L, 320N, 322, 322B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 L, 330B, 330B L, 345B L
1380249
DOOR GP-CAB
902, 906, 908
902, 906, 908
4V5050
DOOR GP-CAB
955K, 955L
955K, 955L