DOOR AS (LH) 2916749 - Caterpillar

Jacking Locations
Park the machine on a hard level surface that is free of overhead obstructions.Note: The body should be empty and lowered before lifting the machine.Note: Any tooling that is used for lifting the machine or for securing the machine in the raised position should only be used on a concrete surface that is flat and level and capable of supporting the weight of the machine.
Engage the parking brake and stop the engine.
Install the steering frame lock.
Place blocks in front and behind the wheels.Raising with a Jack and Supporting with Stands
Illustration 1 g01386856
Locations (A) , and (B) are the suitable jacking points for the machine as shown in Illustration 1. These locations are part of the front frame and the rear frame. A suitable jack with a lifting capacity of 20000 kg (44000 lb) is required to raise the machine at positions (A) and (B) .
Use a suitable jack to raise the front of the machine at position (A) to the required height. Place a suitable stand at position (1) .
Lower the jack until the front of the machine is fully supported by the stand.
Repeat Step 2 and Step 3 for the other side of the machine.
Use a suitable jack to raise the rear of the machine at position (B) to the required height. Place a suitable stand at position (2) and position (3) .
Lower the jack until the rear of the machine is fully supported by the stands.
Repeat Step 5 and Step 6 for the other side of the machine.