DOOR AS-ACCESS 3776510 - Caterpillar

Illustration 8 g01069041
Press "SELECT (+)" (F1) or "SELECT (-)" (F2) in order to adjust the appropriate direction. See the following table.
Table 3
Direction of Function    
Function     "SELECT (+)"     "SELECT (-)"    
"Boom up/dn Sol"     Boom DOWN     Boom UP    
"Stick out/in Sol"     Stick OUT     Stick IN    
"Swing cw/ccw Sol"     Swing CCW     Swing CW    
"Level Upper fwd/bk"     Tilt Arrangement "BWD"     Tilt Upward FWD.    
"Level Upper RH/LH"     Tilt Arrangement RIGHT     Tilt Upward LEFT.    
"Tool up/dn Sol"     Attachment Tilt DOWN     Attachment Tilt UP    
"Right Track fwd/"     RH track Backward     RH track FWD    
"Left Track fwd/"     LH track Backward     LH track FWD    
"Grapple cl/op Sol"     Grapple arms OPEN     Grapple arms CLOSED    
"Accumulator cl/op"     Accumulator arms OPEN     Accumulator arms CLOSED    
"Tilt (wrist) cw/ccw"     Tilt CCW     Tilt CW    The following values can be adjusted:
"MIN CURRENT"
"MAX CURRENT"
"STARTSLOPE"
"FINE CONTROL""MIN CURRENT"
MIN CURRENT - The minimum current is the output to the solenoid when the control is just moved from the HOLD position. When you first get output from the control, the function should not move. When you move the control more, the function should begin to move. If the minimum current is too high, the function will jump when you move the control. If the setting for the current is too low, you must move the control excessively in order to begin movement of the function.
Illustration 9 g01069044
Use the "UP/DN" button in order to choose "MIN CURRENT". Then, press "SELECT" (F1) .Note: Before you adjust the "MIN CURRENT", move the joystick or the toggle switch to the MAXIMUM position. Then, release the control. Use the following procedure to set the current:
Use the "UP/DN" button to adjust the value. Press "OK" (F1) in order to save the new setting.
After the value has been changed, test the function again with the engine at normal operating speed. Move the joystick or the toggle switch through the full