4231248 DOOR AS-ACCESS Caterpillar parts
320E, 320E L, 320E LN, 323E L
Rating:
Alternative (cross code) number:
CA4231248
423-1248
4231248
CA4231248
423-1248
4231248
EXCAVATOR,
Number on catalog scheme:
3
For full view, you need register
Information:
Introduction
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time. Install the lines for the stick first. Install the lines for the boom next. Install the control groups last.Note: Drain the hydraulic fluid from the hydraulic tank before opening the hydraulic system. Remember to fill the hydraulic tank with hydraulic fluid once the installation is complete.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before operating any compartment or disassembling any component containing fluids.After collecting all fluids in suitable containers, dispose of all fluids according to local regulations and mandates.
Safety
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
464-0992 Hydraulic Work Tool Ar - 00
Qty Part No. Description Media
(1) 430-5537 Auxiliary Hydraulic Lines Gp GEHS0947
(1) 430-5539 Auxiliary Hydraulic Lines Gp GEHS0948
(1) 464-1000 Front Lines Gp GEHS0949
(1) 464-1003 Pilot Lines Gp GEHS0950 Tuning Section
Note: Set screw on the bottom of the foot pedal is used to control flow.
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time. Install the lines for the stick first. Install the lines for the boom next. Install the control groups last.Note: Drain the hydraulic fluid from the hydraulic tank before opening the hydraulic system. Remember to fill the hydraulic tank with hydraulic fluid once the installation is complete.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before operating any compartment or disassembling any component containing fluids.After collecting all fluids in suitable containers, dispose of all fluids according to local regulations and mandates.
Safety
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
464-0992 Hydraulic Work Tool Ar - 00
Qty Part No. Description Media
(1) 430-5537 Auxiliary Hydraulic Lines Gp GEHS0947
(1) 430-5539 Auxiliary Hydraulic Lines Gp GEHS0948
(1) 464-1000 Front Lines Gp GEHS0949
(1) 464-1003 Pilot Lines Gp GEHS0950 Tuning Section
Note: Set screw on the bottom of the foot pedal is used to control flow.
Caterpillar SIS machinery equipment:
Caterpillar SIS
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine »
423-1248
DOOR AS-ACCESS
320F L Excavator NHD00001-UP (MACHINE) POWERED BY C4.4 Engine »
423-1248
DOOR AS-ACCESS
323F L Excavators XCF00001-UP (MACHINE) POWERED BY C7.1 Engine »
423-1248
DOOR AS-ACCESS
320F L Excavator YBM00001-UP (MACHINE) POWERED BY C4.4 Engine »
423-1248
DOOR AS-ACCESS
Caterpillar parts catalog:
Parts door Caterpillar catalog:
3468062
DOOR GP-CAB
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
3490141
DOOR AS-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3729322
DOOR GP-CAB
312D L, 312E, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E LN, 328D LCR, 329D, 329D ...
312D L, 312E, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E LN, 328D LCR, 329D, 329D ...
3729323
DOOR GP-CAB
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
3490028
DOOR AS-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3490027
DOOR GP-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3490140
DOOR GP-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
4231249
DOOR AS-ACCESS
320E LN, 323E L
320E LN, 323E L
3490197
DOOR GP-ACCESS
320E LN, 323E L
320E LN, 323E L
3490203
DOOR GP-ACCESS
320E LN, 323E L
320E LN, 323E L
3729325
DOOR AS-CAB
312D L, 312E, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E LN, 328D LCR, 329D, 329E,...
312D L, 312E, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E LN, 328D LCR, 329D, 329E,...
3729324
DOOR AS-CAB
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E L, 320E LRR, 323D L, 324D, 324D L, 324E L, 328D LCR, 329D, 329D L, 329E, 329E L, 336D, 336D2, 336E L, 336...
3490028
DOOR AS-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3335039
DOOR GP-ACCESS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3335046
DOOR AS-ACCESS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3560089
DOOR AS
C15
C15
3541171
DOOR AS
C15
C15
3500413
DOOR GP-ACCESS
320E LRR, 320E RR
320E LRR, 320E RR
3490203
DOOR GP-ACCESS
320E LN, 323E L
320E LN, 323E L
3490197
DOOR GP-ACCESS
320E LN, 323E L
320E LN, 323E L
4231249
DOOR AS-ACCESS
320E LN, 323E L
320E LN, 323E L
3490140
DOOR GP-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3490027
DOOR GP-ACCESS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L