DOWEL 2390689 - Caterpillar

Illustration 1 g00848053
Generator Set Controls (Low Voltage Switchgear) (1) Alarm module (ALM) (2) Generator set control+ (GSC+) (3) Indicators for annunciation (4) Utility transfer trip switch (UTTS) (5) Lockout relay (86) and status lights for the utility breaker (6) Manual loading potentiometer (MLP) (7) VAR or Power factor adjust potentiometer (VPAP) (8) Touchscreen display (9) Synchronizing switch and synchronizing lights (10) Engine control switch (ECS) (11) Speed adjust potentiometer (SAP) (12) Alarm control switch (ACS) (13) Voltage adjust potentiometer (VAP) (14) Emergency stop push button (ESPB) (15) Circuit breaker switch (CBS) (16) Lights for breaker status Note: The alarm control switch (12) is a spring return switch that has three positions: HORN ACK, LAMP TEST and NEUTRAL. The switch will return to the NEUTRAL position when the switch is released.
Illustration 2 g00847599
Generator Set Controls (Low Voltage Switchgear)Interior of the upper right compartment (17) Synchronizer (18) DC power converter (19) Watt transducer (20) Isochronous or droop switch (IDS) (21) Idle speed or rated speed switch (IRS) (22) Programmable logic controller (PLC) (23) Load share module (LSM)For parallel operation, the synchronizer (17) matches the speed of the generator to the frequency of the bus.The power converter (18) has an input range of 18 DCV to 32 DCV. The power converter has an output of 24 DCV. The power converter provides the power for the following items:
PLC
Touchscreen display
Protective relays
Other itemsDuring automatic operation, the watt transducer (19) provides input to the PLC for load management.For constant engine speed during times of variable loads, the isochronous or droop switch (20) is placed in the isochronous mode.The idle speed or rated speed switch (21) adjusts the control for running the engine at idle speed or rated speed.The PLC (22) consists of the following items:
Central processing unit
Discrete input and output
Analog input and output
Communications hub for serial devices
Illustration 3 g00847609
Generator Set Controls (Low Voltage Switchgear)Interior of the upper left compartment (24) Relays for power distribution (25) Circuit breakers for power module distribution (26) Spill containment relay and timer (optional equipment) (27) Water egress relay and timer (optional equipment) (28) Battery chargerThe spill containment and water egress functional components are located in the upper left compartment (if equipped). Relays for power distribution (28) are source selective. There are relays for the following items:
Heaters
Lighting
Battery charger
Other AC circuits for the power moduleThe battery charger (28) is rated at 24 DCV and 20 amperes. The battery charger is switched ON and the battery charger is switched OFF from the rocker switch type circuit breakers. The rocker switches and circuit breakers are mounted on the door.The circuit breakers for the power module distribution (25) are itemized. Refer to the Product Information Section, "Power Distribution Panel".