DOWEL 2849555 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     1    
Verify that the engine oil pump is clean and free of foreign material prior to installation.
Check all of the O-ring seals and the components for wear or for damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00565863
Illustration 2 g00565864
Install Tool (A) and a suitable lifting device to engine oil pump (11). Secure the lifting device to a hoist. Position engine oil pump (11) and the O-ring seal for installation. Install three bolts (12) and the washers to engine oil pump (11). The weight of engine oil pump (11) is 42.5 kg (93.7 lb).
Illustration 3 g00565861
Install oil pan elbow (10), the tube and inlet elbow (2) (not shown) to the front oil pan as a unit with four bolts (9) and the washers.
Illustration 4 g00565860
Connect guard (4) to the alternator with nut (8) and the washer.
Illustration 5 g00565859
Connect guard (4) to the alternator with nut (7) and the washer.
Illustration 6 g00565858
Connect outlet elbow (6) and the guard to the engine oil pump with four bolts (5) and the washers.
Connect guard (4) to the engine with one bolt (3) and the washer.
Illustration 7 g00565813
Connect inlet elbow (2) to the engine oil pump with two bolts (1) and the washers.
Fill the engine with engine oil to the correct level. Refer to Operation and Maintenance Manual, SEBU7173, "Engine Oil and Filter - Change" for the correct procedure.End By:
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Remove the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".