DOWEL 2H1190 - Caterpillar

Safety
All people operating and troubleshooting the marine display unit must employ safe operating practices. Caterpillar, Inc. is not responsible for any personal injury resulting from unsafe or careless use of any of the following:
Hand tools
Power tools
Lifting equipment
Unsafe practices during operation and troubleshootingThere is the possibility of harm to people or damage to property from accidents that may result from the use of manufactured products. Therefore, correct operating procedures should be followed. Products must be used in accordance with the information specified. Products must be used in accordance with the information provided in the Operation and Maintenance Manual of the interacting equipment. Proper safety devices, such as guards, may be required as specified in applicable codes. Safety devices are not provided by Caterpillar, Inc. nor are the devices the responsibility of Caterpillar, Inc..Required Tools
The following tools are required for configuration and troubleshooting.
Table 1
Name Components/Software Requirements
Service Communication Tool USB thumb drive, minimum 1 GB
Cat 5 Ethernet cable
Laptop computer 1) Microsoft Windows 2000/XP/Vista/Windows 7/Windows 8 with 512 MB RAM
Phillips screwdriver #1
Screwdriver with a 1/8 inch blade
Wire terminal crimpers
Deutsche crimp tool For 12 AWG to 24 AWG wire sizes Cat® Marine Display (CMD)
Illustration 1 g03802220
Cat® Marine Display (CMD), 13 inch example
(1) LCD screen
(2) Back button
(3) Acknowledge button
(4) Home button
(5) Audible alarm speakerThe Cat® Marine Display (CMD) is a panel mounted, color liquid crystal display (LCD) device that is used to monitor and display the following:
Engine information
Three60 control information
Vessel information
Diagnostics for the operatorA CMD can be installed at any of the following locations on the vessel depending on the configuration of the vessel.
Bridge
Port wing
Starboard wing
Tower
Engine room
Aft station
Bow station
Fly bridgeA maximum of eight CMDs can be installed on the vessel. Information displayed on the CMD comes from the Engine Control System and the Three60 Control System, via the system data link.The CMD is offered in a 13.3 inch display version and a 7 inch display version.Cat Marine Display 5" (CMD5)
Illustration 2 g06241079
Cat Marine Display 5" (CMD5)
(1) Home
(2) Up Arrow
(3) Down Arrow
(4) Reserved
(5) Alarm Acknowledge
(6) Return
(7) Enter
(8) Day/NightThe following is the CMD5 button functions:
Home (1): Press for home screen. If home button is held for two seconds, then "groupings" screen will appear.
Up Arrow (2): Cycles the user up through available data screens or grouping screens.
Down Arrow (3): Cycles the user down through available data screens or grouping screens.
Reserved (4): Press to activate or deactivate during station keeping.
Alarm Acknowledge (5): Press to acknowledge active alarms and to bring up list of previously active alarms.
Return (6): This button is not assigned on any of the data screens, but it is used in the menu structures.
Enter (7): this button is not assigned on any of the data screens, but is used in the menu structures.
Day/Night (8): Press to toggle between day and night modes. If held for two seconds, "Blackout" mode will be activated. The CMD5 is a panel-mounted device that is used to display and monitor the following conditions:
Engine Information
Vessel Information
DiagnosticsThe CMD5 can be installed on the following locations:
Bridge
Port
Starboard
Engine Room
Aft
BowDefinitions
Swipe Right - Touch the screen and drag your finger