3B8852 DOWEL Caterpillar parts
583K, 955K, 955L, D8H, D8K
Rating:
Alternative (cross code) number:
CA3B8852
3B-8852
3B8852
CA3B8852
3B-8852
3B8852
Weight: 0.02 pounds 0 kg.
Information:
OVERALL LENGTH
20.57
mm
OUTSIDE PIN DIAMETER
9.65
mm
END TYPE A
CHAMFER
END TYPE B
CHAMFER
FLAT/VENTED
N
INSIDE DIAMETER
0
THREAD SIZE
.25-20
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$9.58
30 Sep 2021
Amazon.com
CTP 3B8852 Dowel Pin for Heavy Equipment
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
$7.11
23 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Dowel 3B8852 New
$4.90
31 Mar 2020
0.110231131[0.00] Pounds
-: -
CTP Caterpillar Dowel (3b8852) Aftermarket
Number on catalog scheme:
20
For full view, you need register
Compatible equipment models: 3B8852:
Information:
Assembly Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler.
Cat SIS web machinery list:
Parts dowel Caterpillar catalog:
589, 594, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G, 657E, 657G, 814, 815, 824C, 826C, 834B, 950, 950G, 950G II, 950H, 950K, 955H, 955K, 955L, 962G, 962G II, 962H, 962K, 966C, 966H, 966K...
583K, 931B, D3B, D6H, D7H, D8H, D8K
12F, 14E, 561B, 561C, 561D, 571G, 572G, 583H, 594, 594H, 621, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 637, 637D, 637E, 637G, 639D, 651, 657, 657B, 769, 772, 824, 824B, ...
941, 951B, 955C, 977K, D4D, D6C, D6D, D6D SR, D6E SR, D6F SR, D6G SR, D8H
3S, 4S, 561B, 561C, 561D, 941, 951B, 955C, 955H, 955K, 955L, 977D, 977H, 977K, 977L, D3B, D4D, D4E, D4E SR, D5, D5B, D5E
118, 561B, 561C, 613C, 931, 931B, 931C, 931C II, 933, 933C, 939, 939C, 941, 951B, 955H, 955K, 955L, 977D, D3, D3B, D3C, D3C II, D3C III, D3G, D4C, D4C II, D4C III, D4D, D4E, D4G, D5, D5B, D5C, D5C III...
128, 583K, 950, 951, 955K, 955L, 966C, D8H, D8K
572G, 583H, 980, 980B, 983, D7F, D7G, D7G2, D8H
561B, 977D, D8H, D8K, D9G, D9H
120B, 12E, 12F, 140, 140B, 14E, 955H, 955K, 955L
583K, D8H, D8K
515, 525, 583H, 583K, D10, D8H, D8K
120B, 12E, 12F, 140, 140B, 14E, 955H, 955K, 955L
2B5095
DOWEL
955H, 955K, 955L
955H, 955K, 955L
5K8315
DOWEL
955K, 955L
955K, 955L
4M1653
DOWEL
594, 594H, 769, 772, 773, D7H, D9G, D9H
594, 594H, 769, 772, 773, D7H, D9G, D9H
8M3735
DOWEL
594, 594H, D9G, D9H
594, 594H, D9G, D9H
1S5353
DOWEL
594, D9G
594, D9G
583K, D8H, D8K
3S4289
DOWEL
955H, 977H
955H, 977H
8K7605
DOWEL
955K, 955L
955K, 955L
571G, 572G, 983, 983B, D7F, D7G, D7G2
16, 571G, 572G, 983, 983B, D7F, D7G, D7G2
3K3813
DOWEL
955H, 955K
955H, 955K