DOWEL 8T5353 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01125016
Position heater (16) onto suitable cribbing.
Illustration 2 g01125015
Position relays (18) (not shown) to the outside of heater (16). Install bolts (17). Remove the suitable cribbing under heater (16) .
Illustration 3 g00941772
Connect harness assemblies (15) .
Illustration 4 g00941769
Connect hose assemblies (14). Connect hoses (13). Position cable assembly (12). Install bolt (11) .
Illustration 5 g00941762
Install cover plate (10) .
Illustration 6 g00941771
Install cover (9) .
Illustration 7 g00941763
Illustration 8 g00941764
Connect harness assembly (8). Install cover (7) .
Illustration 9 g00941759
Install cover (6) .
Illustration 10 g01125009
View from outside cab
Illustration 11 g00941758
Position cover (5). Install bolts (4) .
Illustration 12 g01124883
Install covers (3). Position cushion (2) and tighten knob (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System (ELC) - Change".
Recharge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant". Refer to Special Publication, NEDG5065, "Air Conditioning Tools".
Install the primary air filter and the secondary air filter for the cab. Refer to Operation and Maintenance Manual, "Cab Air Filter - Clean/Replace".End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".