9P9650 DOWEL Caterpillar parts
30/30, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G, 69D, 735, 740, 768C, 769C, 769D, 770, 771C, 771D, 772, 772B, 773B, 773D, 773E, 775B, 775...
Rating:
Alternative (cross code) number:
CA9P9650
9P-9650
9P9650
CA9P9650
9P-9650
9P9650
Weight: 0.01 pounds 0 kg.
Information:
OVERALL LENGTH
8.47
mm
OUTSIDE PIN DIAMETER
3.018
mm
END TYPE A
FLT
END TYPE B
CHAMFER
FLAT/VENTED
N
INSIDE DIAMETER
0
ARTICULATED TRUCK, WHEEL TRACTOR,
Compatible equipment models: 9P9650:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
B 138-7575 Link Brackets 2
C 1U-7505 Hydraulic Jack 1
D - Loctite 17430 -
E - Loctite 242 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02138737
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02141286
Disconnect hose assembly (3) and reposition hose assembly (3).
Disconnect fitting assembly (1). Disconnect hose assemblies (4) from swivel (2).
Remove support (5).
Illustration 3 g02141287
Remove clamp (9), bolts (8), retainer (6), and boot (7).
Illustration 4 g02141290Note: The guards can be heavier due to debris on top of the guards.
Use Tooling (C) in order to support and remove guards (11) and (12). The weight of each guard (11) and guard (12) is approximately 23 kg (50 lb). Remove bolts (10), guard (11), and guard (12).
Illustration 5 g02141288
Illustration 6 g02141291
Disconnect hose assemblies (13) and remove fittings (14).
Disconnect fitting (17) and hose assemblies (16) from swivel (2).
Attach Tooling (B) and a suitable lifting device to swivel (2). The weight of swivel (2) is approximately 45 kg (95 lb). Remove bolts (15) and swivel (2). Installation Procedure
Install swivel (2) in the reverse order of removal.
Apply Tooling (D) to the mating surface of swivel (2) and the cover of the undercarriage frame.
Apply Tooling (E) to the threads of bolts (15).
Tighten clamp (9) to a torque of 5 1 N m (44 9 lb in).
Apply Tooling (E) to the threads of bolts (8). Tighten bolts (8) to a torque of 37 4 N m (27 3 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
B 138-7575 Link Brackets 2
C 1U-7505 Hydraulic Jack 1
D - Loctite 17430 -
E - Loctite 242 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02138737
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02141286
Disconnect hose assembly (3) and reposition hose assembly (3).
Disconnect fitting assembly (1). Disconnect hose assemblies (4) from swivel (2).
Remove support (5).
Illustration 3 g02141287
Remove clamp (9), bolts (8), retainer (6), and boot (7).
Illustration 4 g02141290Note: The guards can be heavier due to debris on top of the guards.
Use Tooling (C) in order to support and remove guards (11) and (12). The weight of each guard (11) and guard (12) is approximately 23 kg (50 lb). Remove bolts (10), guard (11), and guard (12).
Illustration 5 g02141288
Illustration 6 g02141291
Disconnect hose assemblies (13) and remove fittings (14).
Disconnect fitting (17) and hose assemblies (16) from swivel (2).
Attach Tooling (B) and a suitable lifting device to swivel (2). The weight of swivel (2) is approximately 45 kg (95 lb). Remove bolts (15) and swivel (2). Installation Procedure
Install swivel (2) in the reverse order of removal.
Apply Tooling (D) to the mating surface of swivel (2) and the cover of the undercarriage frame.
Apply Tooling (E) to the threads of bolts (15).
Tighten clamp (9) to a torque of 5 1 N m (44 9 lb in).
Apply Tooling (E) to the threads of bolts (8). Tighten bolts (8) to a torque of 37 4 N m (27 3 lb ft).
Cat SIS web machinery list:
Parts dowel Caterpillar catalog:
320C, 330B L, 330D L, 637G, 797, 797B, 797F, 950F, 950F II, 950G, 950G II, 950H, 950K, 955K, 955L, 960F, 962G, 962G II, 962H, 962K, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, HEX-WEDGE, IT...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 627, 627B, 627E, 627F, 627G, 627...
14E, 24H, 24M, 572G, 589, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 641B, 651E, 6...
589, 594, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G, 657E, 657G, 814, 815, 824C, 826C, 834B, 950, 950G, 950G II, 950H, 950K, 955H, 955K, 955L, 962G, 962G II, 962H, 962K, 966C, 966H, 966K...
120G, 12G, 130G, 140G, 14E, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 517, 527, 561M, 561N, 613C, 613C II, 613G, 615, 637E, 641B, 651E, 657E, 657G, 69D, 735, 735B, 740, 740B, 768C, 769C, 769D, 770, 77...
12F, 14E, 561B, 561C, 561D, 571G, 572G, 583H, 594, 594H, 621, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 637, 637D, 637E, 637G, 639D, 651, 657, 657B, 769, 772, 824, 824B, ...
12E, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 639D, D4H, D5H, D6C, D6D, D6D SR, D6E SR, D6F SR, D6G SR, D7F, D7G, D9E
14E, 518, 518C, 528, 528B, 530B, 572G, 615, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 6...
120B, 12E, 12F, 140, 140B, 14E, 571G, 621, 621B, 623B, 627, 627B, 631C, 631E, 631G, 633D, 633E II, 637D, 637E, 641, 641B, 650B, 651, 651E, 657, 657B, 657E, 657G, 666, 955H, 983, D7F
120B, 12E, 12F, 140, 14E, 350, 375, 375 L, 5080, 5110B, 5130B, 5230, 5230B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637D, 637E, 637G, 666, 777, 793C, 797, 797B, 797F, 824C, 826C, 955H, 977H, D10
574, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 797, 797B, 797F, 814, 814F, 814F II, 815, 815B, 815F, 815F II, 816, 816B, 816F, 816F II, 936, 938F, 938G, 950, 950B...
518, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 797B, 797F, 814, 920, 930, 950, 966C
4W9969
DOWEL
3512, D11N
3512, D11N
4W9963
DOWEL
3512, D11N
3512, D11N
9L5871
DOWEL
1693, 3304, 3306
1693, 3304, 3306
9L9543
DOWEL
1140, 1150, 1160, 3160
1140, 1150, 1160, 3160
9L8431
DOWEL
1140, 1150, 1160, 3160, 797, 797B
1140, 1150, 1160, 3160, 797, 797B
9L9548
DOWEL
1140, 1160, 225, 3160, 613
1140, 1160, 225, 3160, 613
1372675
DOWEL
3054
3054
1372674
DOWEL
3054
3054
6I3554
DOWEL
3406B, 3406C
3406B, 3406C
8P6321
DOWEL
30/30, 517, 527, 561M, 578, 583R, 587R, 589, 611, 613C, 613C II, 613G, 615, 615C, 814B, 815B, 826C, 834B, 836, 910, 916, 926, 931B, 933, 935C, 936, 936F, 939, 950B, 950B/950E, 950F, 950F II, 966D, 966...
30/30, 517, 527, 561M, 578, 583R, 587R, 589, 611, 613C, 613C II, 613G, 615, 615C, 814B, 815B, 826C, 834B, 836, 910, 916, 926, 931B, 933, 935C, 936, 936F, 939, 950B, 950B/950E, 950F, 950F II, 966D, 966...
8H9513
DOWEL
12E, 30/30, 587T, 621, 623, 773B, 776, 777, 854G, 854K, 955H, 977H, 992G, 992K, 993K, 994, 994D, 994F, 994H, D10, D11N, D11R, D11T, D250E, D250E II, D300E, D300E II, D320A, D4D, D4E, D8H, D8K, DEUCE
12E, 30/30, 587T, 621, 623, 773B, 776, 777, 854G, 854K, 955H, 977H, 992G, 992K, 993K, 994, 994D, 994F, 994H, D10, D11N, D11R, D11T, D250E, D250E II, D300E, D300E II, D320A, D4D, D4E, D8H, D8K, DEUCE
30/30, 518, 518C, 528, 528B, 530B, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 594H, 611, 615, 615C, 814B, 814F, 815B, 815F, 816F, 920, 930, 941, 951B, 966D, 966F, 966F II, 970F, 980, 980B, 980C, 980F...