DRAWBAR GROUP 4H9108 - Caterpillar

Mounting and Location
The UMBC cabinet can be anchored to a wall. Before installing the UMBC, ensure that the location allows 914 mm (36 inch) clearance at the front of the unit.Installation
Place the unit in a clean environment
Ensure that this area is dust free
Ensure that there is good air circulation around the unit cabinet
Ensure that the wall can support the weight of the unit and the necessary mounting hardware
Ensure that there are 152 mm (6 inch) of clearance on each side. Clearance is needed for air circulation.
The UMBC has four mounting holes in the panel for wall mounting.The holes accommodate 1/4 inch mounting hardware.There must be at least 305 mm (12 inch) of clearance on top and 406 mm (16 inch) at the bottom for the UMBC cabinet.The enclosure must be mounted on two horizontal parallel uni-strut type channels.