DRIVE GP-FAN 1035868 - Caterpillar

Removal Procedure
Remove the operator's seat.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the proper procedure to drain and fill the cooling system.
Personal injury can result from contact with refrigerant.This system is under pressure at all times, even if the engine is not running. Heat should never be applied to a charged system.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use caution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, evacuate the system recovering the refrigerant before removing the fitting.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel away from the machine or where they can be seen.
Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" in order to recover and charge the air conditioner system. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Illustration 1 g01629313
Remove cover, panel and filter (1) .
Illustration 2 g01629417
Disassemble the console and position right side console (2) aside.
Illustration 3 g01629574
Remove bolts (3) . Remove bolt (4) . Remove clips (6) . Remove cover (5) .
Illustration 4 g01629339
Loosen clamps (8) . Disconnect hose (7) .
Illustration 5 g01629353
Disconnect harness assemblies (10) and (11) . Remove plate (9) .
Illustration 6 g01629359
Lift blower motor (13) and disconnect harness assemblies (12) . Remove blower motor (13) .
Illustration 7 g01629373
Disconnect tube assembly (14) .
Illustration 8 g01629375
Disconnect tube assembly (16) . Disconnect hoses (17) . Remove evaporator coil assembly (15) .Installation Procedure
Install the air conditioner and heater in the reverse order of removal.